Datagest
SoftwareGibitre Software
PlatformSmart Test
IdentificationRheoCheck
SoftwareMooney
Check - SoftwareDensity
Check - SoftwareHardness
Check - SoftwareTensor
Check - SoftwareTR_Test -
SoftwareBrittleness
Check -
SoftwarePressCheck
SoftwareCompression
Set -
SoftwareCompany Connection
SoftwareGibitre
Software InstallerMaintenance and Calibration ServiceISO 17025 Accredited CalibrationRemote Assistance Service
Support request form
Italiano
English
Español
Français
Deutsch
Português
Polskie
Čeština
Magyar
Русский
Türk
中文
日本人
한국어
Arab
The instrument measures the resilience of elastomers with hardness ranging from 30 to 85 IRHD points.
The Resilience is the ratio between energy yield and energy applied in the impact between the instrumet's hammer and the specimen having dimensional characteristics defined by the standards.
This measure provides useful indications regarding the dynamic behavior of an elastomer.
The measurement is performed by determining the rebound angle of the hammer following the impact.
The instrument provides direct reading of the resilience value.
The results of 5 tests performed on the specimen, their mean and standard deviation are displayed.
The touch-screen display installed on the instrument permits to:
• Display the results of 5 tests made on the sample
• Calculate mean and standard deviation of the results
• Calibrate the angle reading of the instrument
• Export the data
The sample holder is conforming to ISO 4662 and ASTM D 7121 standards. The application tool supplied with the instrument premits easy insertion and removal of the sample.
Gibitre_Serial Connection software for data storage and printout.
Maintenance and Calibration service for your Rebound Tester.
The calibration is performed with reference to the requirements of ISO 4662 standard.
The service includes:
- Ordinaly maintenance of the instrument
- Testing of the friction: measure of the number of free oscillation of the striker before the stop.
- Calibration of the diameter of the striker.
- Calibration of the weight of the striker.
- Calibration of the length of the striker.
- Issue and e-mail shipment of the Calibration Certificate with traceability to primary standards.
Mould for preparing specimens in compliance with ISO 4662 and ASTM D 7121standards.
The instrument is totally developed and produced in the plant of Gibitre Instruments in Italy.
All the mechanical parts are produced in the company workshop using modern CNC machines.
Components and sensors from well-known brands are selected in order to ensure the maximum reliability in the measures
Internal trained personnel takes care of all the production stages: assembly, start-up, calibration, packing, shipment and installation.
