Thickness meter with adjustable support
Digital comparator with adjustable support for thickness measurements
Standards the instrument complies with:
ASTM D1414; ASTM D3574; ASTM D395-A; ASTM D395-B; EN 681-1; FCA 9.02132/01; FIAT 50410; ISO 815; ISO 1856; ISO 6916-1; ISO 6916-2; PV 3307; PV 3330; UNI 4913-2;
ASTM D1414; ASTM D3574; ASTM D395-A; ASTM D395-B; EN 681-1; FCA 9.02132/01; FIAT 50410; ISO 815; ISO 1856; ISO 6916-1; ISO 6916-2; PV 3307; PV 3330; UNI 4913-2;
Adjustable support for thickness meter
Device for thickness measurements consisting of support with adjustment of the vertical position and grinded plane for the positioning of the specimen.
The digital comparator model to be applied can be selected based on the characteristics to be measured.
Applicable Thickness meters
The digital comparator model to be applied can be selected based on the characteristics to be measured.
Comparators are available with application of controlled forces and with tops with specific shapes for measurements in accordance with ISO, PV, ASTM, etc. standards
Compression Set Software
The software allows to acquire the thickness measurement from the comparator (connected via USB cable) and to calculate the results of the Compression Set tests.
In particular, the software allows you to:
• identify the specimens
• select the specimen processing method that was used
• enter the initial and final thickness of each specimen and the thickness of the spacer used
• Calculate the Compression Set value obtained in compliance with the standards
• Compare the result with the tolerance limits and save the results in the Gibitre SQL standard database
• Produce Reports and Statistics.
Support
Support Characteristics
Diametro della base di appoggio: 50 mm
Corsa di regolazione Verticale: 100 mm
Peso Dispostivo (senza comparatore): 1100 g
Corsa di regolazione Verticale: 100 mm
Peso Dispostivo (senza comparatore): 1100 g
Thickness Meters
Resolution of thickness meter
0.001 mm
Force Applied
0.4 ÷ 0.7 N
Pressure applied with 4mm diameter tip: 22 ± 5 kPa
Pressure applied with 4mm diameter tip: 22 ± 5 kPa
Tip for Thickness meter
Flat tip with 4 mm diameter
(other on request)
(other on request)
Other Characteristics
Run:12.7 mm
Maximum permissible error (Entire range):0.003 mm
H MPE (Hysteresis):0.002 mm
R MPE (Repeatability):0.002 mm
Protection:IP42
Mass:170 g
Maximum permissible error (Entire range):0.003 mm
H MPE (Hysteresis):0.002 mm
R MPE (Repeatability):0.002 mm
Protection:IP42
Mass:170 g
Gibitre Instruments
Via dell'industria, 18
Bergamo (Italy)
te. +39 035 461146
www.gibitre.it
info@gibitre.it
Copyright Gibitre Instruments
