Rebound Check
Schob type Rebound Tester fitted with touch-screen Display system for the calculation of the resilience of elastomers with hardness between 30 and 85 irhd
Standards the instrument complies with:
ASTM D7121; ISO 4662;
ASTM D7121; ISO 4662;
Instrument characteristics
The instrument measures the resilience of elastomers with hardness ranging from 30 to 85 IRHD points.
The Resilience is the ratio between energy yield and energy applied in the impact between the instrumet's hammer and the specimen having dimensional characteristics defined by the standards.
This measure provides useful indications regarding the dynamic behavior of an elastomer.
The measurement is performed by determining the rebound angle of the hammer following the impact.
The instrument provides direct reading of the resilience value.
The results of 5 tests performed on the specimen, their mean and standard deviation are displayed.
Instrument control
The touch-screen display installed on the instrument permits to:
• Display the results of 5 tests made on the sample
• Calculate mean and standard deviation of the results
• Calibrate the angle reading of the instrument
• Export the data
Sample Holder
The sample holder is conforming to ISO 4662 and ASTM D 7121 standards. The application tool supplied with the instrument premits easy insertion and removal of the sample.
Software for data import
Gibitre_Serial Connection software for data storage and printout.
Standard Calibration service for Rebound Tester
Maintenance and Calibration service for your Rebound Tester.
The calibration is performed with reference to the requirements of ISO 4662 standard.
The service includes:
- Ordinaly maintenance of the instrument
- Testing of the friction: measure of the number of free oscillation of the striker before the stop.
- Calibration of the diameter of the striker.
- Calibration of the weight of the striker.
- Calibration of the length of the striker.
- Issue and e-mail shipment of the Calibration Certificate with traceability to primary standards.
Mould for sample preparation
Mould for preparing specimens in compliance with ISO 4662 and ASTM D 7121standards.
Development and production
The instrument is totally developed and produced in the plant of Gibitre Instruments in Italy.
All the mechanical parts are produced in the company workshop using modern CNC machines.
Components and sensors from well-known brands are selected in order to ensure the maximum reliability in the measures
Internal trained personnel takes care of all the production stages: assembly, start-up, calibration, packing, shipment and installation.
Type of measurement
Resilience measurement on samples in compliance with standards (Rebound %)
Test method
Recording of 5 test results (Rebound %) and automatic calculation of mean and standard deviation.
Sensitivity
0.2 %
Software
Data transmission (option)
The software, compatible with Windows 11, allows you to receive data from the instrument's USB port and store it in Gibitre's SQL database.
Calibration
Calibration Report
Calibration report with traceability to primary standards in conformity with the Calibration requirements specified in ISO 4662 standard
Construction Characteristics
Power supply
110/220 VAC ±10%,50/60 Hz ±3,0.2 A single phase
Electrical Power
40 W
Control Display
Touch Screen display for instrument setup and results display
The display permits to: • display the results of 5 tests • calculate mean and standard deviation of the results • calibrate the angle reading of the instrument • export the data
The display permits to: • display the results of 5 tests • calculate mean and standard deviation of the results • calibrate the angle reading of the instrument • export the data
Weight
30 Kg
Display Dimensions
External dimensions W 92 x D 150 x H 30 mm - Usable Area 60 x 100 mm
Instrument Dimensions
(W x D x H) 200 x 200 x 500 mm
Gibitre Instruments
Via dell'industria, 18
Bergamo (Italy)
te. +39 035 461146
www.gibitre.it
info@gibitre.it
Copyright Gibitre Instruments
