Datagest
SoftwareGibitre Software
PlatformSmart Test
IdentificationRheoCheck
SoftwareMooney
Check - SoftwareDensity
Check - SoftwareHardness
Check - SoftwareTensor
Check - SoftwareTR_Test -
SoftwareBrittleness
Check -
SoftwarePressCheck
SoftwareCompression
Set -
SoftwareCompany Connection
SoftwareGibitre
Software InstallerMaintenance and Calibration ServiceISO 17025 Accredited CalibrationRemote Assistance Service
Support request form
Italiano
English
Español
Français
Deutsch
Português
Polskie
Čeština
Magyar
Русский
Türk
中文
日本人
한국어
Arab
The Climate Chamber is an accessory for the TensorCheck dynamometer that enables temperature-controlled testing. It allows for the combination of temperature control with mechanical loading of the test specimen: the TensorCheck software directly controls the chamber, initiating the measurement once the set conditions are met. This allows materials to be tested under the desired conditions.
Without a refrigeration unit, the chamber covers temperatures from ambient to +250 °C; with the refrigeration unit, which can also be installed at a later date, the range extends from −40 °C to +250 °C. A modular solution that expands the application possibilities of your measuring instruments.
Control functions include: temperature setpoints, thermal gradient, and conditioning time within defined tolerance limits. These parameters allow you to set up test cycles that combine temperature control with the application of mechanical stress once the required conditions have been met. If you are looking to test material specimens under precise thermal conditions, the Climate Chamber integrates with and enhances your Tensor Check testing bench.
The Environmental Chamber is an accessory applicable to the Tensor Check tensile tester to carry out tests at controlled temperature.
• The Climatic Chamber can be supplied without refrigerating unit allowing to carry out tests between room temperature and +250°C.
• The refrigeration unit, which can also be installed after the purchase of the Climatic Chamber, extends its use to carry out tests between -40°C and +250°C.
All Tensor_Check-Profile tensile testers are set up for the application of the climatic chamber that can be purchased and installed even after the purchase of the instrument
The TensorCheck software allows you to directly adjust the climatic chamber.
In this way it is possible to prepare test cycles that combine the temperature regulation and the execution of the mechanical stress of the specimen when the required conditions have been reached.
The climatic chamber control functions allow you to set:
• Set of temperatures
• Thermal gradient
• Thermal conditioning time within the set tolerance limits.
The instrument produced by Gibitre uses a Refrigeration Unit to reduce the temperature.
The use of the refrigeration unit, compared to cooling by liquid nitrogen, allows to:
• Check the test temperature perfectly, avoiding oscillations that may alter the results.
• Carry out long-term tests without risking to end the liquid nitrogen supply before finishing the test
• Eliminate the hazards related with manipulation of nitrogen
The Climatic chamber can be equipped with an internal differential strain gauge for measuring the temperature-controlled differential elongation.
The strain gauge complies with the requirements of ISO 5893, has a resolution of 0.01mm and a total stroke of 400mm.
The strain gauge can be moved to the bottom of the chamber for testing that does not require it.
The digital linearization of the elongation reading guarantees extreme measurement accuracy over the entire stroke.
The Environmental chamber is positioned on aluminum guides and can be easily moved back and forth to perform tests with or without temperature control.
The Environmental chamber is positioned on aluminum guides and can be easily moved back and forth to perform tests with or without temperature control.
