RheoCheck MD - Drive
Moving Die Rheometer controlled by Personal Computer.


Standards the instrument complies with:   
ASTM D5289;   ISO 6502-1;   ISO 6502-3;    

Overview 
The Rheocheck MD - Drive measures the cure characteristics of a rubber compound in conformity with the international standards ISO 6502-3 and ASTM D 5289.
The measure of the vulcanization is carried out by measuring the modification in the mechanical characteristics of the sample. The instrument permits to apply a cyclic strain to a test piece and to measure the associated force. The test is performed at a defined temperature and the measure of stiffness recorded continuously as a function of time.


Why choose Rheocheck MD - Drive? 
• Totally developed and produced in Italy
• Top brand Components
• Sealed testing chamber
• Exclusive construction for the micrometric adjustment of the gap between the dies
• Independent temperature controllers with 0.1°C resolution
• Compressed air cooling circuit for rapid temperature adjustment
• Touch-screen display for instrument control
• Full license of Rheocheck_10 software optimized for Bar-code sample identification
• Full license of Datagest software for complete management of Gibitre SQL Database


The new 'Drive' generation 
The new generation of 'Drive' instruments is the result of 40 years of experience in the measurement of rheology of rubber and incorporates the most modern technologies regarding mechanical construction, measurement sensors and control software. Have a look at the movie.



RheoCheck_10 Software 
The RheoCheck_10 program connects to the Gibitre SQL database and allows you to collect all the results within the Datagest data management program.
The program allows you to:
• Quickly identify the sequence of tests to be performed
• Automatically adjust the instrument according to the required test conditions
• Analyze the Test curves (S', S", S* Tang_Delta, Der(S'), Temperatures of the dies)
• Compare the results with the tolerance limits
• Elaborate statistical analysis (Carta-X, Gaussiana, Media, Dev St., Max, Min, Cp, Cpk)
• Produce customized reports
• Store Results and Curves to SQL database
• Export data with custom format


Calculated Results 
The software allows you to prepare customized test procedures that include all the calculations required by the standards and product specifications. The dedicated page describes all the available calculations.

Pressure control 
The instrument can be optionally equipped with a pressure sensor for the testing of the expansion evolution of the sample during the curing.
This option is useful for the analysis of cellular rubber formulations.




Automatic sample loader 
The device allows to position 5 test pieces on the loading slide and automatically perform the tests on all the samples.
Before starting a test, the software automatically regulates the instrument according to the test conditions required for the next sample in the queue.
When the test conditions are within the expected tolerance limits, the sample loader moves the sample in the right position and starts the test.


Instrument Control Panel 
The instrument is equipped with a large touch-screen display with dimensions 10.2“.
The buttons on the display permit to start and stop the tests.
The display provides complete information about the status of the instrument: connection to the software, temperature of the dies, diagnostic of the sensors installed.


Light panel 
A light panel, installed in the front part of the instrument, changes the color and permits to check the status of the instrument from a distance. The indicator light identifies the following statuses: Instrument ready, instrument under test, instrument setting test temperature, no specimen in the queue (with autoloader).



Test dies 
Pressurized test chamber conforming to the international standards.
Specifically designed Low-friction and Long-Life seals permit to perform up to 4.000 tests and minimize maintenance needs.
The micrometric adjustment of the distance between the chambers is carried out independently by the exclusive mechanical adjustment vernier. The device allows you to easily adjust the thickness of the specimen to meet the requirements of ISO 6502-3.
The thermal insulators, used to avoid heat transmission, have been chosen for their excellent mechanical characteristics and low thermal conductivity.
The insulators are coated with a surface treatment based on fluorinated polymers, which ensures extremely high resistance to chemical agents and ease of cleaning.


Temperature regulation 
The regulation of the temperature is performed using thermo-regulators with PID micro-processor and with 0.1°C resolution.
Independent temperature control units ensure sophisticate temperature control and easy replacement in case of failure.
Electrical heating resistances have been specifically designed for this instrument to ensure quick and efficient heating.
The test chambers are equipped with a compressed air cooling circuit, controlled by the temperature control units, which allows rapid temperature reduction.


Torque Calibrator Supplied 
The supplied torque calibrator allows the user to periodically check the torque reading of the instrument.

The calibration wizard inside the software:
• Requires the insertion of the calibrator between the instrument surfaces
• Waits for the thermal conditioning of the instrument
• Performs the comparison between the instrument measurement and the calibrator torque value
• Requires removal of the calibrator after verification




Datagest program: total Traceability 
The Datagest program is the Database Management Tool always installed in combination with all Gibitre instrument-control programs.
The program permits to:
• Select, filter, print, export and analyse the test results stored with all the instruments connected.
• Prepare test procedures by defining the test conditions and the results to be produced
• Set tolerance limits for each product by manual insertion or using the statistical analysis (mean and standard deviation) of saved results
• Prepare multi-instrument test reports


Gibitre Standard SQL Database 
All the Gibitre programs use a database with SQL structure for saving the results.
The database can be installed inside an SQL instance present on the company server or it can be installed on a PC connected to a measuring instrument. The installation of the Microsoft SQL service (Express version) is included in the delivery.


Industry 4.0 integration 
The instrument and the software have been specifically developed to optimize integration with other environments.
The database in SQL format and the Gibitre_Company_Connect program allows you synchronize your company management software with Gibitre database and to speed up the identification of the tests and to use bar-code readers or similar devices.




Preparation of Test Reports 
Version 10 programs make the following options available for preparing test reports:
• Selection of printing language
• Company logo insertion
• Print a single test / a Group of tests
• Print of Test Curves
• Print Numerical Results
• Print the Limits of Tolerance
• Print Statistical Results
• Print Legend with explanation of results
• Print the Operator Signature
• Print Customized Notes
• Preparation of PDF file

The program integrates a REPORT EDITOR that allows you to completely edit the report and prepare fully customized report formats.


Safety devices 
The instrument is equipped with:
• Class 1 Safety switch, which prevents the closure of the dies if the safety panel is not closed.
• Safety Push-button
• Safety lock of the maintenance access door, which ensures safe usage even in non-standard operation conditions.
• CE Labelling


Calibration of the Instrument 
The calibration of the instrument is performed in conformity with the requirements of international standards.
The report includes the following calibration steps: distance between the test dies, temperatures of the upper and lower dies, thermal recovery time at the beginning of the test, oscillation angle, oscillation frequency, closing force of the testing chambers, measurement of torque, measurement of the calibrator spring supplied to the customer, dimensions of testing dies (optional).
The calibration report includes complete traceability to the reference instruments used.
The calibration report includes the final check made with Gibitre standard rubber.




Development and production 
The instrument is totally developed and produced in the plant of Gibitre Instruments in Italy.
All the mechanical parts are produced in the company workshop using modern CNC machines.
Components and sensors from well-known brands are selected in order to ensure the maximum reliability in the measures
Internal trained personnel takes care of all the production stages: assembly, start-up, calibration, packing, shipment and installation.


Torque transducer 
The Interface® torque transducer is positioned in the upper test chamber to minimize the influence of friction and vibrations.

Die oscillation control 
The kinematic for the oscillatory movement of the lower test chamber has been developed to ensure perfect operation of the instrument under heavy operating conditions and for extremely long periods: Siemens® motor, SKF® bearings
Calibrated gauges are supplied together with the instrument to easily set the oscillation angle to 0.5° or 1,0°.




Constant Volume Sample Cutter 
Volumetric Cutting Machine for the preparation of samples with constant volume required by the standard.

Plastic Foils for MD Rheometer Test 
Boxes of polyamide or polyester film sheets to perform tests without automatic loader.

Film Rolls for automatic loader for MD Rheometer 
Polyester or Polyamide film Rolls for automatic loader for MD Rheometer with the following characteristics:
Film Thickness: 0.023mm
Film Width: 130 mm
Internal Diameter of the roll: 76 mm
Outside Diameter of the roll: 176 mm
Length of film: 770 m

NOTE: To use the charger, you must use two rolls.
A pair of rolls allows to carry out (with loader Gibitre) 3200 tests.



Instrument Characteristics 
 
Torque sensor 
Brand: Interface®
Capacity: 20 N*m
Resolution: 0.01 dN*m
Linearity Error (%FS): +-0.25 
Oscillation frequency 
100 cycles/minute (1,7 ± 0,1 Hz) 
Oscillation angle 
0.5°, 1° (3° or other angles available on request).
Easy adjustment of the angle with quick replacement of calibrated gauges 
Temperature 
Between room temperature and +250 °C - Resolution 0.1 °C 
Test Dies: 
Biconical dies, closed die system, sealed 
Seals for test dies: 
Low Friction & easily changeable long-life seals to provide superior lifetimes of up to 10.000 tests  
Chamber Closure: 
11.5 ± 0.5 kN.
Soft chamber closure at reduced speed to improve repeatability and ensure film integrity. 
Cooling system 
Compressed air cooling circuit 
Pressure sensor (optional) 
Brand: Interface®
Capacity: 7 MPa
Resolution: 0.1 kPa
Linearity Error (%FS): +-0.25 
Software 
 
Numerical Test Data 
Torque Values: MI, ML, M90, MX, MH, PCR S’’@ML, S"@MH, TanD@ML, TanD@MH. Scorch Time: tS1, tS2, tSX. Cure Time: t90, tX, tML, tMH, tPCR, tRX, CRI
Pressure: PL, PH, tP, MPR, tMPR 
Displayed Curves 
Elastic (S'), Viscose (S"), Complex (S*), Tan-Delta, storage shear Modulus (G’), loss shear Modulus (G’’), Curing speed, Dies Temperatures 
Units 
Torque: dNm or lbf.in.
Time: minutes and seconds, minutes and minutes/100, seconds
Temperature: °C, °F 


Results storage 
The test result sand the curves are stored in the SQL Gibitre database which is installed in combination with the software 
Software usage Languages 
Italian, English, French, Spanish, German, Portuguese, Russian, Chinese, Japanese, Turkish, Polish, Czech 
Control Panel 
 
Characteristics 
Dimensions 10.2” 
Data displayed 
Active connection to the software, motor on-off, temperatures of the dies, heating status, sample on sample-holder (with sample loader), test running 
Type of device 
Capacitive display (permits the use with gloves) 
Light Panel 
 
Permits to check from a distance the following statuses 
Instrument ready, instrument under test, instrument setting test temperature, no specimen in the queue (with autoloader) 
Safety Devices 
 
Safety Devices 
Class 1 Safety switch for main piston (Idem)
Safety Pushbutton
Safety lock of the maintenance access door
CE labelling 
Labelling 
CE Labelling 
Calibration 
 
Calibration Report 
Calibration report with traceability to primary standards in conformity with the Calibration requirements specified in ISO 6502-3 standard 
Calibrated parameters 
The certificate includes the calibration of:
- Torque reading
- Temperature of the dies
- Speed of temperature recovery at test start.
- Oscillation amplitude and frequency
- Closure force of the dies
- Final verification with standard compound 
Torque Spring for calibration 
Torque calibration spring supplied with the instrument 
Construction Characteristics 
 
Electronic Card 
Electronic card with STN 32F 429 micro-processor 
Power supply 
220 VAC ± 10%, 50-60 Hz ± 3, 4 A, single phase
110 VAC ± 10%, 60 Hz ± 3 on request 
Power 
700 Watt 
Compressed air 
6 bar. Compressed air regulation unit integrated into the instrument 
Compressed air consumption 
Approx.65 NL/cycle 
Dimensions and weight 
Without sample loader (W x D x H): 684 x 671 x 1419 mm
With sample loader (W x D x H): 1229 x 671 x 1419 mm
Weight: 180 Kg 
Personal Computer (optional) 
 
Minimum configuration 
Intel Core i3 2 GB RAM 
Compatible Operating Systems 
Windows 10 and 11 
Connection to the instrument 
USB port 
Options 
 
Automatic sample loader 
Automatic test of 5 samples 
Volumetric Die Cutter 
For the preparation of samples with constant volume 
Polyester & Polyamide Films 
 
Box of Polyamide Foils 
Thickness: 0.025 mm
Dimension: 100 x 100 mm
Box Content: 500 foils 
Box of Polyesther Foils 
Thickness: 0.025 mm
Dimension: 100 x 100 mm
Box Content: 500 foils 
Polyamide film Roll  
Film Thickness: 0.023 mm
Film Width: 130 mm
Internal Diameter of the roll: 76 mm
Outside Diameter of the roll: 176 mm
Length of film: 770 m 
Polyester film Roll  
Film Thickness: 0.023 mm
Film Width: 130 mm
Internal Diameter of the roll: 76 mm
Outside Diameter of the roll: 176 mm
Length of film: 770 m 


Gibitre Instruments
Via dell'industria, 18
Bergamo (Italy)
te. +39 035 461146
www.gibitre.it
info@gibitre.it

Copyright Gibitre Instruments
Moving Die Rheometer controlled by Personal Computer.

RheoCheck MD - Drive

Get a Quotation
Moving Die Rheometer controlled by Personal Computer.
Why Choose Rheocheck MD - Drive?
Overview 
The Rheocheck MD - Drive measures the cure characteristics of a rubber compound in conformity with the international standards ISO 6502-3 and ASTM D 5289.
The measure of the vulcanization is carried out by measuring the modification in the mechanical characteristics of the sample. The instrument permits to apply a cyclic strain to a test piece and to measure the associated force. The test is performed at a defined temperature and the measure of stiffness recorded continuously as a function of time.
Why choose Rheocheck MD - Drive? 
• Totally developed and produced in Italy
• Top brand Components
• Sealed testing chamber
• Exclusive construction for the micrometric adjustment of the gap between the dies
• Independent temperature controllers with 0.1°C resolution
• Compressed air cooling circuit for rapid temperature adjustment
• Touch-screen display for instrument control
• Full license of Rheocheck_10 software optimized for Bar-code sample identification
• Full license of Datagest software for complete management of Gibitre SQL Database
The new 'Drive' generation 
The new generation of 'Drive' instruments is the result of 40 years of experience in the measurement of rheology of rubber and incorporates the most modern technologies regarding mechanical construction, measurement sensors and control software. Have a look at the movie.
More movies for Rheocheck Drive


 
Software
RheoCheck_10 Software 
The RheoCheck_10 program connects to the Gibitre SQL database and allows you to collect all the results within the Datagest data management program.
The program allows you to:
Quickly identify the sequence of tests to be performed
Automatically adjust the instrument according to the required test conditions
Analyze the Test curves (S', S", S* Tang_Delta, Der(S'), Temperatures of the dies)
Compare the results with the tolerance limits
• Elaborate statistical analysis (Carta-X, Gaussiana, Media, Dev St., Max, Min, Cp, Cpk)
• Produce customized reports
Store Results and Curves to SQL database
Export data with custom format
Calculated Results 
The software allows you to prepare customized test procedures that include all the calculations required by the standards and product specifications. The dedicated page describes all the available calculations.
Pressure control 
The instrument can be optionally equipped with a pressure sensor for the testing of the expansion evolution of the sample during the curing.
This option is useful for the analysis of cellular rubber formulations.
Designed for the user
Automatic sample loader 
The device allows to position 5 test pieces on the loading slide and automatically perform the tests on all the samples.
Before starting a test, the software automatically regulates the instrument according to the test conditions required for the next sample in the queue.
When the test conditions are within the expected tolerance limits, the sample loader moves the sample in the right position and starts the test.
Instrument Control Panel 
The instrument is equipped with a large touch-screen display with dimensions 10.2“.
The buttons on the display permit to start and stop the tests.
The display provides complete information about the status of the instrument: connection to the software, temperature of the dies, diagnostic of the sensors installed.
Light panel 
A light panel, installed in the front part of the instrument, changes the color and permits to check the status of the instrument from a distance. The indicator light identifies the following statuses: Instrument ready, instrument under test, instrument setting test temperature, no specimen in the queue (with autoloader).
Attention to every detail
Test dies 
Pressurized test chamber conforming to the international standards.
Specifically designed Low-friction and Long-Life seals permit to perform up to 4.000 tests and minimize maintenance needs.
The micrometric adjustment of the distance between the chambers is carried out independently by the exclusive mechanical adjustment vernier. The device allows you to easily adjust the thickness of the specimen to meet the requirements of ISO 6502-3.
The thermal insulators, used to avoid heat transmission, have been chosen for their excellent mechanical characteristics and low thermal conductivity.
The insulators are coated with a surface treatment based on fluorinated polymers, which ensures extremely high resistance to chemical agents and ease of cleaning.
Temperature regulation 
The regulation of the temperature is performed using thermo-regulators with PID micro-processor and with 0.1°C resolution.
Independent temperature control units ensure sophisticate temperature control and easy replacement in case of failure.
Electrical heating resistances have been specifically designed for this instrument to ensure quick and efficient heating.
The test chambers are equipped with a compressed air cooling circuit, controlled by the temperature control units, which allows rapid temperature reduction.
Torque Calibrator Supplied 
The supplied torque calibrator allows the user to periodically check the torque reading of the instrument.

The calibration wizard inside the software:
• Requires the insertion of the calibrator between the instrument surfaces
• Waits for the thermal conditioning of the instrument
• Performs the comparison between the instrument measurement and the calibrator torque value
• Requires removal of the calibrator after verification
Data Management
Datagest program: total Traceability 
The Datagest program is the Database Management Tool always installed in combination with all Gibitre instrument-control programs.
The program permits to:
Select, filter, print, export and analyse the test results stored with all the instruments connected.
Prepare test procedures by defining the test conditions and the results to be produced
Set tolerance limits for each product by manual insertion or using the statistical analysis (mean and standard deviation) of saved results
Prepare multi-instrument test reports
Gibitre Standard SQL Database 
All the Gibitre programs use a database with SQL structure for saving the results.
The database can be installed inside an SQL instance present on the company server or it can be installed on a PC connected to a measuring instrument. The installation of the Microsoft SQL service (Express version) is included in the delivery.
Industry 4.0 integration 
The instrument and the software have been specifically developed to optimize integration with other environments.
The database in SQL format and the Gibitre_Company_Connect program allows you synchronize your company management software with Gibitre database and to speed up the identification of the tests and to use bar-code readers or similar devices.
Preparation of Test Reports 
Version 10 programs make the following options available for preparing test reports:
• Selection of printing language
• Company logo insertion
• Print a single test / a Group of tests
• Print of Test Curves
• Print Numerical Results
• Print the Limits of Tolerance
• Print Statistical Results
• Print Legend with explanation of results
• Print the Operator Signature
• Print Customized Notes
• Preparation of PDF file

The program integrates a REPORT EDITOR that allows you to completely edit the report and prepare fully customized report formats.
Safety devices 
The instrument is equipped with:
• Class 1 Safety switch, which prevents the closure of the dies if the safety panel is not closed.
• Safety Push-button
• Safety lock of the maintenance access door, which ensures safe usage even in non-standard operation conditions.
• CE Labelling
Calibration of the Instrument 
The calibration of the instrument is performed in conformity with the requirements of international standards.
The report includes the following calibration steps: distance between the test dies, temperatures of the upper and lower dies, thermal recovery time at the beginning of the test, oscillation angle, oscillation frequency, closing force of the testing chambers, measurement of torque, measurement of the calibrator spring supplied to the customer, dimensions of testing dies (optional).
The calibration report includes complete traceability to the reference instruments used.
The calibration report includes the final check made with Gibitre standard rubber.
Gibitre calibration service
Development and production 
The instrument is totally developed and produced in the plant of Gibitre Instruments in Italy.
All the mechanical parts are produced in the company workshop using modern CNC machines.
Components and sensors from well-known brands are selected in order to ensure the maximum reliability in the measures
Internal trained personnel takes care of all the production stages: assembly, start-up, calibration, packing, shipment and installation.
Torque transducer 
The Interface® torque transducer is positioned in the upper test chamber to minimize the influence of friction and vibrations.
Die oscillation control 
The kinematic for the oscillatory movement of the lower test chamber has been developed to ensure perfect operation of the instrument under heavy operating conditions and for extremely long periods: Siemens® motor, SKF® bearings
Calibrated gauges are supplied together with the instrument to easily set the oscillation angle to 0.5° or 1,0°.
Accessories
Constant Volume Sample Cutter 
Volumetric Cutting Machine for the preparation of samples with constant volume required by the standard.
Plastic Foils for MD Rheometer Test 
Boxes of polyamide or polyester film sheets to perform tests without automatic loader.
Film Rolls for automatic loader for MD Rheometer 
Polyester or Polyamide film Rolls for automatic loader for MD Rheometer with the following characteristics:
Film Thickness: 0.023mm
Film Width: 130 mm
Internal Diameter of the roll: 76 mm
Outside Diameter of the roll: 176 mm
Length of film: 770 m

NOTE: To use the charger, you must use two rolls.
A pair of rolls allows to carry out (with loader Gibitre) 3200 tests.
Technical specification
Reference Standards
Standards the instrument complies with:  ASTM D5289; ISO 6502-1; ISO 6502-3;  
Instrument Characteristics
Torque sensor  Brand: Interface®
Capacity: 20 N*m
Resolution: 0.01 dN*m
Linearity Error (%FS): +-0.25 
Oscillation frequency  100 cycles/minute (1,7 ± 0,1 Hz)  Oscillation angle  0.5°, 1° (3° or other angles available on request).
Easy adjustment of the angle with quick replacement of calibrated gauges 
Temperature  Between room temperature and +250 °C - Resolution 0.1 °C  Test Dies:  Biconical dies, closed die system, sealed  Seals for test dies:  Low Friction & easily changeable long-life seals to provide superior lifetimes of up to 10.000 tests   Chamber Closure:  11.5 ± 0.5 kN.
Soft chamber closure at reduced speed to improve repeatability and ensure film integrity. 
Cooling system  Compressed air cooling circuit  Pressure sensor (optional)  Brand: Interface®
Capacity: 7 MPa
Resolution: 0.1 kPa
Linearity Error (%FS): +-0.25 
Software
Numerical Test Data  Torque Values: MI, ML, M90, MX, MH, PCR S’’@ML, S"@MH, TanD@ML, TanD@MH. Scorch Time: tS1, tS2, tSX. Cure Time: t90, tX, tML, tMH, tPCR, tRX, CRI
Pressure: PL, PH, tP, MPR, tMPR 
Displayed Curves  Elastic (S'), Viscose (S"), Complex (S*), Tan-Delta, storage shear Modulus (G’), loss shear Modulus (G’’), Curing speed, Dies Temperatures  Units  Torque: dNm or lbf.in.
Time: minutes and seconds, minutes and minutes/100, seconds
Temperature: °C, °F 
Results storage  The test result sand the curves are stored in the SQL Gibitre database which is installed in combination with the software  Software usage Languages  Italian, English, French, Spanish, German, Portuguese, Russian, Chinese, Japanese, Turkish, Polish, Czech 
Control Panel
Characteristics  Dimensions 10.2”  Data displayed  Active connection to the software, motor on-off, temperatures of the dies, heating status, sample on sample-holder (with sample loader), test running  Type of device  Capacitive display (permits the use with gloves) 
Light Panel
Permits to check from a distance the following statuses  Instrument ready, instrument under test, instrument setting test temperature, no specimen in the queue (with autoloader) 
Safety Devices
Safety Devices  Class 1 Safety switch for main piston (Idem)
Safety Pushbutton
Safety lock of the maintenance access door
CE labelling 
Labelling  CE Labelling 
Calibration
Calibration Report  Calibration report with traceability to primary standards in conformity with the Calibration requirements specified in ISO 6502-3 standard  Calibrated parameters  The certificate includes the calibration of:
- Torque reading
- Temperature of the dies
- Speed of temperature recovery at test start.
- Oscillation amplitude and frequency
- Closure force of the dies
- Final verification with standard compound 
Torque Spring for calibration  Torque calibration spring supplied with the instrument 
Construction Characteristics
Electronic Card  Electronic card with STN 32F 429 micro-processor  Power supply  220 VAC ± 10%, 50-60 Hz ± 3, 4 A, single phase
110 VAC ± 10%, 60 Hz ± 3 on request 
Power  700 Watt  Compressed air  6 bar. Compressed air regulation unit integrated into the instrument  Compressed air consumption  Approx.65 NL/cycle  Dimensions and weight  Without sample loader (W x D x H): 684 x 671 x 1419 mm
With sample loader (W x D x H): 1229 x 671 x 1419 mm
Weight: 180 Kg 
Personal Computer (optional)
Minimum configuration  Intel Core i3 2 GB RAM  Compatible Operating Systems  Windows 10 and 11  Connection to the instrument  USB port 
Options
Automatic sample loader  Automatic test of 5 samples  Volumetric Die Cutter  For the preparation of samples with constant volume 
Polyester & Polyamide Films
Box of Polyamide Foils  Thickness: 0.025 mm
Dimension: 100 x 100 mm
Box Content: 500 foils 
Box of Polyesther Foils  Thickness: 0.025 mm
Dimension: 100 x 100 mm
Box Content: 500 foils 
Polyamide film Roll   Film Thickness: 0.023 mm
Film Width: 130 mm
Internal Diameter of the roll: 76 mm
Outside Diameter of the roll: 176 mm
Length of film: 770 m 
Polyester film Roll   Film Thickness: 0.023 mm
Film Width: 130 mm
Internal Diameter of the roll: 76 mm
Outside Diameter of the roll: 176 mm
Length of film: 770 m 
References
Gibitre RheoCheck
is currently installed in
39 countries
Request the List of top References
Download
Brochure

      
Product leaflet

General catalogue

Calibration certificate
example
CE certificate
example
MooneyCheck - Drive
See also   >
Datagest Software
See also   >
Constant Volume Sample Cutter
See also   >
News
Call to action
Ask for quotation
a guided way to ask
for a quotation
Mail
info@gibitre.it
The good old e-mail
ready for every season
Phone
+39 035 460146
Your calls are always welcome
monday to friday
Newsletter
Subscribe
Stay updated
with the last news
of your sector
Local agent
from: -
See the whole list

In your country
in your language
at your service
Optimist.it
Welcome to the Gibitre Instruments web site
Please chose the preferred Cookie Management.
Benvenuti nel sito Gibitre Instruments
Per continuare scegliete la Gestione dei Cookie che preferite.
Cookies policy
For detailed informations about the use of cookies, please read our
Cookies Management Practice.

Gestione dei Cookies
Per maggiori informazioni sui cookie utilizzati consultate la nostra
Procedura sull'Uso dei Cookies.